UNIMIG U11147 EVOLVE AC/DC Module

UNIMIG U11147 EVOLVE AC/DC Module

The AC/DC module enhances your MIG machine by adding high-frequency AC & DC TIG capabilities, advanced AC MIG settings, and improved heat input with cleaning action typically reserved for AC TIG.

Features:

• Single & Double Pulse MIG: Reduces the heat and minimizes spatter, without compromising penetration
• 100+ Synergic Programs: Select your metal, wire size, and gas, and you’re ready
• 5” LCD Touch Screen: The large touchscreen display is clear, with an easy-to-navigate interface
• Digital MIG Torch: Adjust your amps, current, and voltage right on the MIG torch itself
• AC MIG: You can get even more control over your aluminum MIG welds by using alternating current (AC)
  • The heat input is provided by AC, and the cleaning action is usually reserved for AC TIG
• AC Welding Speed: The advanced AC Welding Speed increases efficiency
  • By setting the rate at which the wire is deposited during the negative portion of the AC cycle, you can adjust your welding speed while maintaining your desired arc length
• AC/DC TIG: Weld every kind of metal. Because it can run on Alternating Current (AC) you’re able to weld aluminum as well as mild and stainless steel on Direct Current (DC)
• High-Frequency TIG: Maximize your results from start to finish
  • A high-frequency torch can start an arc without contacting the workpiece, reducing the risk of contaminating the tungsten or the weld
  • It also means you get access to the entire TIG weld cycle, including pre-and post-gas and up-and-down slope parameters
• Foot Pedal: Enjoy greater control and precision with our optional foot control accessory
  • This handy feature allows you to easily adjust your TIG amperage on the fly, without interrupting your torch movement.
• Maximum AC Amperage: Set the maximum current of the positive side of the AC cycle the machine can reach
  • By reducing the amperage of the positive portion of the cycle, the negative portion works to compensate, allowing for a more penetrative weld and reduced risk of tungsten melting.
• Mixed TIG: Experience the best of both worlds. Mixed AC/DC combines the efficiency of AC and the penetration of DC- TIG in one weld
  • With it, you get faster welding speeds, better penetration, a faster weld puddle on cold workpieces, and you can weld on thicker materials

Specifications:

• Protection class: IP23S
• Insulation class: H
• Dinse connector: 35/50
• Standard: AS 60974.1
• Suitable material: TIG – Aluminium, magnesium, zinc alloys, mild steel, stainless steel, copper, silicon bronze, titanium

Warranty:

• 5 Years Warranty Covered by UNIMIG