Ramset P8CPGCT CT Clip Contractors Pack With 20mm SC620 Drive Pins & Fuel Cell

Ramset P8CPGCT CT Clip Contractors Pack With 20mm SC620 Drive Pins & Fuel Cell

The CTClip is the all in one cable tie system. With the integral cable tie the CTClip can be used for cable, conduit and tube work.

Includes:

• 500 x Clips
• 500 x 20mm SC620 Pins
• Pulsa Gas 800

Features:

• CTClip can be used for cable, conduit and tube work
• Maximum cable cluster or tube diameter of 63mm
• Clip base raised above work surface
• In-built energy absorber for optimum pin penetration
• Side mount clip into pin guide
• One handed installation
• Fix from the ground with the PulsaLift Pole (Sold Separatly)
• Optional plug and screw installation

Specifications:

• CT Clips:
  • Material: High Impact Nylon 66
  • Spacing Recommendation: 0.5 - 1m
  • Fire Resistance Proterties: UL94HB Fire Test
  • Maximum Diameter (Tube, Cable): 63mm
• SC620 Pins:
  • Material: Carbon Steel
  • Corrosion Protection: Zinc Mechanically Plated
  • Nominal Head Diameter: 6.4mm
  • Nominal Shank Diameter: 3.0/2.7mm
  • Shear Strength: 1200N/mm2
  • Tensile Strength: 1950N/mm2
  • Hardness: 53-55HRc
  • Suitable For Substrates: Concrete(<50MPa), Hollow Concrete, Steel, Steel Decking
  • Length: 20mm

NOTE: Test concluded when clip pulled over pin head or cable tie failed. Job-site testing may be required to determine actual achievable job-site values. Results have been achieved with a CableMaster tool set at minimum overdrive setting. Accessories failing to fix correctly should be removed and a new fixing set away from any spalled concrete. Tension loads provided are for static load situations only. Values represent a minimum factor of safety of 3:1 on the lowest test results achieved. Minimum edge distance 75mm, minimum spacing between fixings 50mm. Tension loads are per fixing, however a minimum of 3 fixings per fastening unit should be used.