Milwaukee M18FPP2FN-502B 18V 5.0Ah Li-ion Cordless Brushless Fuel 2pce Framing & Finishing Nailer Combo Kit Power Pack

The M18 FUEL 30°-34° Framing Nailer sets the new standard for cordless framing nailers. By leveraging our nitrogen spring mechanism, POWERSTATE Brushless Motor, and REDLINK PLUS Intelligence, this nailer provides the user with pneumatic performance, and the convenience and freedom of cordless power. Delivering the power to sink full round head nails into dense engineered lumbers, this framing nailer allows the user to tackle even the most demanding framing applications. To keep the user productive and efficient throughout the day, the framing nailer fires 3 nails per second with zero ramp-up time, meaning a nail is fired as soon as the trigger is pulled. Additionally, the cordless framing nailer operates using sealed compressed nitrogen to drive each nail, completely eliminating the cost of gas cartridges and maintenance associated with competitors’ nailers. The M18 FUEL 30°-34° Framing Nailer delivers the pneumatic performance and durability that professional carpenters and remodelers expect, without the hassle of a compressor and hose or gas cartridge.

Includes:

• 1 x Rafter hook
• 1 x Hex key

Features:

• Power to sink nails in timber framing
• No gas cartridge required
• Tool free drive depth adjustment
• Dry fire lockout
• On board hex key storage
• No-mar tip included
• Fires 3 nails per second
• Zero ramp-up time
• Sequential and contact actuation firing modes
• On / Off power button

Specifications:

• Voltage: 18V
• Collation angle: 30°-34° Clipped or Full Head Nail
• Nail collation: 30°-34°
• Nail size: 50 - 90mm
• Magazine capacity: 51
• Max fire rate: 3 nails/sec
• Firing modes: Sequential or contact actuation
• Dimensions (L x W x H): 358mm x 160mm x 363mm
• Weight: 4.4kg

Warranty:

• 3 Years Warranty Covered By Milwaukee

15 Gauge Angled Finishing Nailer provides peak productivity at your Jobsite, delivering unmatched nailing performance without the hassle of a compressor and hose. Leveraging our nitrogen air spring mechanism, the 15 Gauge Nailer allows the user to consistently sink nails to the required depth in hard and softwoods while leaving clean nail holes, allowing for repeatable results and easy filling. The nitrogen air spring mechanism, combined with our POWERSTATE Brushless Motor and REDLINK PLUS Intelligence, delivers a pneumatic-like nailing response with zero ramp-up time from nail to nail, for minimal downtime and maximum efficiency throughout the job. The nailer also features a compact and ergonomic design providing access into tight spaces where nailing is required while limiting fatigue when using the tool. When paired with an M18 REDLITHIUM-ION 2.0Ah battery, the nailer fires up to 750 nails per charge. The MILWAUKEE M18 FUEL 15 Gauge Angled Finishing Nailer delivers the pneumatic performance that professional users demand, with the freedom and convenience of cordless.

Includes:

• 1 x Belt Hook

Features:

• Compact, lightweight design allows for maximum access into tight spaces    
• Angled battery bay allows for the tool to stand upright when not in use    
• A clear line of sight for accurate nail placement    
• Fires in 0.05 seconds, with up to 3 nails per second    
• Zero ramp uptime and low recoil    
• Up to 750 nails per charge using M18 REDLITHIUM ION 2.0Ah Battery    

Specifications:

• Collation Angle: 34
• Nail Size: 32 mm - 63 mm (1 ¼" 2 ½")
• Nail Diameter: 15 Gauge (1.8 mm)
• Magazine Capacity: 110
• Max Fire Mode: 3 Nails/Sec
• Firing Modes: Sequential & Contact Actuation
• Weight: 2.9 kg

Warranty:

• 5 Years Warranty Covered By Milwaukee

The M18 5.0Ah REDLITHIUM-ION BATTERY features superior pack construction, electronics, and performance to deliver more work per charge and more work over the life of the pack than any battery on the market. M18 5.0Ah REDLITHIUM-ION BATTERY features an advanced design, protecting the pack against harsh jobsite environments. This protection routes water away from the electronics and out of the battery pack, extends run-time and life by minimizing heat, and prevents pack failures from vibration or drops.

This unique to Milwaukee design also allows the battery to operate in extreme cold weather conditions (below -180C). Managed by Milwaukee’s exclusive REDLINK Intelligence, the battery features overload protection to prevent you from damaging your cordless power tools in heavy-duty situations, while the discharge protection prevents cell damage.

Features:

• Powers more than 100 Milwaukee M18 cordless power tools
• REDLINK intelligence provides optimised performance and over load protection
• Best in class construction - offers long lasting performance and durability
• Fuel gauge on board displays remaining run time for less down time on the job
• All weather performance, delivers fade free power in extreme jobsite conditions

Specifications:

• Voltage: 18V
• Capacity: 5.0Ah
• Charge time:
• M12-18FC: 60 mins
• M12-18C: 105 mins
• Weight: 0.72kg

Warranty:

• 2 Years Warranty Covered By Milwaukee

Once again, Milwaukee is on the ball for providing the fastest charging solutions for tradies. With the ever-growing demand to charge batteries in both voltages, the new and improved multi voltage charger, M12-18FC, can sequencial charge a 12V or 18V battery up to 40% faster, increasing your productivity on the worksite.

Features:

• Charges all Milwaukee batteries up to 40% faster
• Charges all M12 and M18 batteries
• Sequencial charging
• REDLINK intelligence communicates directly with the battery
• REDLINK monitors cell voltage and temperature
• REDLINK charges to optimise the performance, protect and extend the life of the battery

Specifications:

• Voltage: 12V & 18V
• Battery type: Li-ion
• Charge Time:
• 2.0Ah: 26 minutes
• 4.0Ah: 47 minutes
• 5.0Ah: 59 minutes
• 6.0Ah: 75 minutes
• 9.0Ah: 90 minutes 
• Weight: 0.77kg 

Warranty:

• 2 Years Warranty Covered By Milwaukee