Makita

[Pre-Order] Makita DLX2414F01 18V 3.0Ah Li-ion Cordless Brushless 2pce Combo Kit

FREE SHIPPING
Item ID: W257740
Model: DLX2414F01
Pre-Order
$499.00
This product does not incur bonus points
Humm
|
Zip Pay
|
Afterpay
Check StockCheck Stock Availability

ShippingDelivery
| FREE Shipping over $99*

Shipping cost and delivery time
Best Prices Guaranteed

The Makita 18V LXT Sub-Compact Brushless Hammer Driver-Drill (DHP487) is a drilling and driving solution with significantly less weight. The 18V Sub-Compact Hammer Driver-Drill is part of a new class of compact, with the size and weight of lower voltage tools but with the performance, power and compatibility of 18V. The DHP487 has an efficient brushless motor with two speed settings and dual L.E.D. lights to illuminate the work area. At only 164mm and 1.7kg. (with battery, sold separately) it's a drilling and driving solution with superior comfort and handling.

Features:

  • Compact design for improved handling and control. At only 164mm in length this is the shortest hammer drive drill in the 18V LXT lineup
  • 3 Drilling modes, screwdriver mode for a constant finish when fastening screws. Drilling mode with 40Nm max. torque & Hammer drilling mode for drilling masonry up to a maximum 13mm hole diameter.
  • High brightness twin LED joblight with pre-glow & after glow functions illuminates your working area for greater visibility during application.
  • 2 Speed mechanical gearing, high speed mode produces 1700rpm for rapid drilling speed while low speed produces high levels of torque to suit high load operation.
  • Highly dirable aluminium diecast gear housing protects the tool from potential damage that may occur on a jobsite.
  • Extreme protection technology (XPT) protects the tool against dustt & moisture even in the harstest jobsite conditions, increasing durability.

Specifications:

  • Voltage 18V
  • Maximum Drilling Capacities:
    • Wood:
      • Auger Bit: 36mm
      • Self-Feeding Bit: 35mm
      • Hole Saw: 51mm
    • Steel: 13mm
    • Masonry: 13mm
  • Lo Load Speed:
    • Hi: 0-2000rpm
    • Lo: 0-400rpm
  • Impact Rate: 
    • Hi: 0-25,500ipm
    • Lo: 0-7500ipm
  • Maximum Lock Torque: 40Nm
  • Maximum Tightening Torque: 
    • Hard: 40Nm
    • Soft: 25Nm
  • Overall Length: 164mm
  • Weight: 1.1kg

Warranty:

  • 3 Years Warranty Covered by Makita
  • 5 Years Extended Warranty via registration through Makita within 30 days of purchase



The Makita 18V LXT Sub-Compact Brushless Impact Driver (DTD157) is a compact fastening solution with significantly less weight. The DTD157 is part of a new class of compact power tools, with the size and weight of lower voltage tools but with all the performance and power of the 18V LXT Range. The DTD157 has an efficient brushless motor with two speed settings and dual L.E.D. lights to illuminate the work area. The innovative Assist Mode (A-mode) helps eliminate "screw cam-out" and "cross threading" by driving at low speed until tightening begins and is ideal for driving longer fasteners. At only 133mm and 1.5kg. (with battery, sold separately) it is a fastening solution with superior comfort and handling.

Features:

  • Brushless motor produces 140N of max. tightening torque
  • Twin LED joblights to impove visibility in dark working environments for added convenience
  • 2-Stage power selection for controlled fastening speed & power, allowing the user to optimize performance for the task at hand
  • Extreme Protection Technology (XPT) ensures the tool can withstand the harshest of work environments and jobsites. The DTD157 also features an aluminium hammer case, making it a durable choice.
  • Ergonomically designed handle with a rubberised soft-grip improves control & comfort during application.

Specifications:

  • Voltage: 18V
  • Maximum Capacity (Standard Bolt): M5 - M14
  • Maximum Capacity (High Tension Bolt): M5 - M12
  • No Load Speed:
    • Hard: 0-3000rpm
    • Soft: 0-1300rpm 
  • Impact Rate: 
    • Hard: 0-4100ipm
    • Soft: 0-2000ipm
  • Maximum Tightening Torque: 140Nm
  • Drive Shank (Hex): 6.35mm (1/4")
  • Overall Length: 133mm
  • Weight: 0.9kg

Warranty:

  • 3 Years Warranty Covered by Makita
  • 5 Years Extended Warranty via registration through Makita within 30 days of purchase



The Makita 18V LXT Li-ion 3.0Ah battery, BL1830B-L, charges faster and works longer than standard Li-ion batteries, giving you and your cordless tools unmatched performance and productivity to take on the most demanding applications.

The BL1830B-L features an impressive rapid charge time of 22 minutes, Star Protection Technology protecting the battery from Overload, Over-discharge and Over-heating.  As well as the multi contact slide terminal ensuring stable contact with the tool even when under extreme vibration.

Features:

  • Integrated L.E.D. battery charge level indicator allows user to monitor battery charge
  • Fast 22 minute charging time
  • Battery delivers consistent power and run time in extreme temperatures, even in winter (-20°C)
  • Impact-resistant outer case and shock-absorbing inner-liner are engineered to protect the battery
  • Sixteen contact terminals maintain a constant connection with the tool to help prevent power loss or fluctuation, even during high-vibration applications
  • Battery resists self-discharge and remains ready for use even after long periods of storage
  • Sensitive electronics are protected with a thick gel coating, preventing damage against dust and moisture
  • Star protection computer controls - includes overload protection, over-discharge protection and over heat protection
  • The battery and tool communicate, protecting your tool and battery from overload by cutting power when put under abnormally high current draw
  • If the battery reaches a certain level of heat it will cut power to the tool, protecting the tool and battery from overheating

Specifications:

  • Voltage: 18V
  • Amp hour: 3.0Ah
  • Cell type: Lithium-Ion
  • Charging time: 60 minutes
  • Weight: 0.6kg

Warranty:

  • 2 Years Warranty covered by Makita



The Makita DC18WC 14.4V–18V LXT Battery Charger is a compact and reliable charging solution for Makita LXT slide-on Li-Ion batteries. Designed for cost-conscious users, it features LED charge status indicators, a wall-mountable design, and a dust and drip-resistant housing. Capable of charging a 3.0Ah battery in approximately 80 minutes and a 6.0Ah battery in around 160 minutes, it's ideal for keeping your tools powered and ready for the job.

Features:

  • Compatible with Makita 14.4V and 18V LXT slide-on Li-Ion batteries
  • Compact design with up to 45% smaller footprint than the DC18SD charger
  • Charges a 3.0Ah battery in approximately 80 minutes
  • Charges a 6.0Ah battery in approximately 160 minutes
  • LED charging status indicator provides clear charging progress
  • Wall-mountable design helps save valuable workspace
  • Dust and drip-resistant construction for added durability
  • Maximum output current of 2.1A
  • Supports charging from temperatures as low as 0°C
  • Digital power display indicates charging level
  • More cost effective option
  • Optimum charging system to maximise cycle life and work volume

Specifications:

  • Voltage: 14.4-18V
  • Compatible battery Type: Makita LXT Slide-On Li-Ion Batteries
  • Continuous rating input: 54Wh
  • The charging time is as follows: (Batteries not included)
    • 1.5Ah battery: 40 minutes
    • 2.0Ah battery: 55 minutes
    • 3.0Ah battery: 80 minutes
    • 4.0Ah battery: 110 minutes
    • 5.0Ah battery: 135 minutes
    • 6.0Ah battery: 160 minutes
  • Charging Display: LED Indicator
  • Dimensions (L x W x H): 110mm x 137mm x 67mm
  • Weight: 0.34kg

Warranty:

  • 2 Years Warranty covered by Makita
  • 5 Years Extended Warranty via registration through Makita within 30 days of purchase



The Makita 821524-1 is a purpose-built plastic carry case designed to organise and protect your 18V drill and impact driver combo kit. With dedicated compartments for two tools, four batteries, one charger, and accessories, this case keeps your essential equipment secure, organised, and ready for transport between job sites. This empty carry case is engineered for trade professionals and serious DIY users who need reliable protection and organisation for their Makita 18V cordless tool sets. The 821524-1 features a robust plastic construction with custom foam inserts that hold tools firmly in place, preventing movement and damage during transport while maximising storage efficiency in your van or workshop.

Features:

  • Dual Tool Storage: Holds one drill and one impact driver with secure foam positioning
  • Four Battery Capacity: Dedicated slots for up to four 18V batteries of various capacities
  • Integrated Charger Compartment: Secure space for one Makita charger unit
  • Accessory Storage: Built-in compartments for drill bits, driver bits, and small accessories
  • Durable Plastic Construction: Impact-resistant material protects contents from knocks and drops
  • Secure Latching System: Reliable closures keep case sealed during transport
  • Compact Footprint: Space-efficient design fits easily in vehicle storage areas
  • Carry Handle: Ergonomic handle for comfortable single-handed transport
  • Professional Organisation: Custom foam layout keeps tools and accessories separated and accessible

Specifications:

  • Model: 821524-1
  • Brand: Makita
  • Type: Empty plastic carry case
  • Tool Capacity: 1 × drill, 1 × impact driver
  • Battery Capacity: 4 x 18V batteries (Not Included)
  • Charger Capacity: 1 x charger unit (Not Included)
  • Material: Impact-resistant plastic
  • External Dimensions (L × W × H): 500mm × 370mm × 145mm 
  • Weight: 5kg



The Biggest Range Of The Best Brands At The Best Prices