Industek SVQ450F 0.6HP 50mm (2") Submersible Dirty Water Pump

Industek SVQ450F 0.6HP 50mm (2") Submersible Dirty Water Pump

Industek's SVQ450F pump is designed for heavy duty applications such as pumping out inspection pits, ditches, and footings where solids may be present as well as general irrigation. The pump features a stainless steel welded shaft for long life, thermal overload protection and float switch which automatically turns the pump off when water level has dropped. Supplied with an approx 6m cable and approved plug.

Features:

• Heavy dity 0.6HP motor with built-in thermal protector
• 8.5m max head and 5m submersible depth
• Small and lightweight design
• Low noise and low vibration
• Stainless steel welded shaft for long life
• Max grain size of 25mm
• Float switch which automatically turns pump off when water level has dropped
• Max liquid temperature of 40ºC

Suitable for:

• Construction Sites
• Drainage Systems
• Wastewater Drainage
• Basement Pits
• Pools and Spas

Specifications:

• Power: 0.6HP (450W)
• Voltage: 220V 50Hz
• Phase: Single
• Soeed: 2860r/min
• Max water flow: 200L/min
• Max head: 8.5m
• Max Grain Size: 25mm
• Outlet Diameter: 50mm
• Submersible depth: 5m from Impeller Centre
• Max Water Temperature: 40ºC
• PH Scope of Level: From 4 ~ 10

Warranty:

• 12 Month Warranty covered by Industek