[Temporarily Out Of Stock] Grabo GV2-1B-FB-1S V2 Portable Cordless Vacuum Lifter Suction Cup

[Temporarily Out Of Stock] Grabo GV2-1B-FB-1S V2 Portable Cordless Vacuum Lifter Suction Cup

The GRABO® V2 keeps the original motor, pressure gauge, 14.8 V battery, and foam seal that pros have trusted for years - now paired with the ergonomic handle from the PRO model for all-day comfort. A new pressure-release button gives you more controlled material release, five LED indicators show battery level at a glance, and full rubber covers protect every button against dust, debris, and water on the jobsite. The classic analog pressure gauge stays right where the original GRABO® put it - readable at a glance and proven on jobsites for years. You know the moment a seal is solid and when it's time to re-seat. Five LED battery indicators sit alongside it, so power level and vacuum status are both visible without breaking your workflow. The GRABO® V2 grips glass, ceramic tile, metal, plastic, wood, rough slate, rough concrete, and drywall - on textured surfaces with peak/valley heights under 0.1 in (3 mm). Use it in perpendicular or parallel hold to handle awkward materials safely up to a maximum lift of 375 lbs (170 kg).

Features:

• The original GRABO® motor and pressure gauge keep the proven performance pros already rely on every day
• Grips glass, ceramic tile, metal, plastic, wood, rough slate, rough concrete, and drywall - on textured surfaces with peak/valley heights under 3mm
• Use it in perpendicular or parallel hold to handle awkward materials safely up to a maximum lift of 170kg
• The same balanced grip from the PRO model - comfortable on long lifts and easy to control with one hand
• A built-in ON/OFF sensor stops the motor at full vacuum and turns it back on if it loses suction - hands-free, all day
• 14.8V Li-ion 2600mAh battery pack with five LED indicators so you always know remaining runtime - up to 1.5 hours on a full charge
• An enhanced pressure-release button gives you smoother, more controlled material release on every set-down

Specifications:

• Battery: 14.8 VDC 2600 mAh Li-ion
• Rater Power: 16W
• Charger Input Voltage: 100-240 VAC, 50/60 Hz
• Battery Charge Time: >2hr
• Non-Stop Running Time @ Full Charge: Up to 1.5hr
• Running Cycles @ Full Charge: 900 ON/OFF cycles (10 seconds)
• Stand-by Mode (Charge Hold): Up to 30 days
• Battery Indicator: 5 LED level indicators
• Working Load Limit: 120kg
• Max Lift: 170kg
• Lifting Capacity (per material):
  • Perpendicular Hold:
    • Glass: 170kg
    • Ceramic Tile: 170kg
    • Metal: 110kg
    • Plastic: 100kg
    • Wood: 100kg
    • Rough Slate: 80kg
    • Rough Concrete: 80kg
    • Drywall: 75kg
  • Parallel Hold:
    • Glass: 120kg
    • Ceramic Tile: 120kg
    • Metal: 110kg
    • Plastic: 100kg
    • Wood: 65kg
    • Rough Slate: 80kg
    • Rough Concrete: 80kg
    • Drywall: 65kg
• Rated Air Flow: 0.7 CFM (20 L/min)
• Max. Vacuum Rate: 11.6 PSI (0.8 bar / 80 kPa)
• Pressure Indicator: Analog pressure gauge
• Pump Service Life: 100000+ ON-OFF cycles / 800+ hrs continuous
• Working Temperature: 0°C - 60°C
• Applicable Surface Type: Peak/valley height < 0.1 in (3 mm)
• Additional Features: Ergonomic PRO handle, sealed rubber buttons, controlled pressure release
• Dimensions (L x W x H): 299mm x 184mm x 122mm
• Weight: 1.54kg (w/ Battery)