Fluke I2000FLEX (2584912) i2000 Flexible AC Current Clamp

Fluke I2000FLEX (2584912) i2000 Flexible AC Current Clamp

The i2000 is an AC current probe utilizing the Rogowski principle. It can be used to measure currents up to 2000 A when used in conjunction with multimeters, recorders or data loggers. The flexible and lightweight measuring head allows quick and easy installation in hard to reach areas.

Features:

• Three ranges: 20A, 200 A & 2000 A, 100 mV/A, 10 mV/A & 1 mV/A output
• Ideal for current measurement on thick and hard to reach conductors without breaking the circuit
• Maximum conductor diameter 178 mm
• CAT III 600 V safety rating

Specifications:

• Current ranges:
• 20 A
• 200 A
• 2000 A
• AC rms
• Output sensitivity (AC-coupled):
• 1 mV
• 10 mV
• 100 mV
• 1 mV per A
• Load impedance: 100 kΩ minimum
• Accuracy at +25°C: ±1% of range (45 Hz to 65 Hz)
• Linearity 10% to 100% of range: ±0.2% of reading
• Noise:
• 8 mV AC rms (30 A)
• 2 mV AC rms (300 A, 3000 A)
• Frequency range: 10 Hz to 20 kHz (-3 dB)
• Phase error:
• < ±1° (45 Hz to 65 Hz)
• ±10° (at 20 kHz)
• Position sensitivity with cable > 25 mm from the coupling: ±2% of range
• External field with cable > 200 mm from the head: ±1% of range
• Power supply: 2 x AA/MN 1500/LR6 Alkaline, 200 hours, low battery indicator
• Temperature Coefficient: ±0.08% of reading per °C
• Working voltage:
• See Safety standards section
• 600 V AC rms or DC
• Head Circumference: 610 mm (24 in)
• Head cable diameter: 14.3 mm (0.56 in)
• Head bend radius: 38.1 mm (1.5 in)
• Cable length (head to electronics): 2m (6.56 ft)
• Output connection: Molded 4mm safety plugs (not integrated)
• Operating temperature range: 0°C to +70°C (32°F to 158°F) (head and electronics)
• Storage temperature range:
• -40°C to +105°C (-40°F to 221°F) (head)
• -20°C to +85°C (-4°F to 185°F) (electronics)
• Operating humidity: 15% to 85% (non-condensing)
• Safety standards:
• EN 61010-031: 2002
• EN 61010-2-032: 2002
• EN 61010-1: 2001
• 600 Vrms, Category III, Pollution Degree 2
• Use of the probe on uninsulated conductors is limited to 600 V ac rms or dc and frequencies below 1 kHz.
• EMC standards: EN 61326: 1998 +A1, A2, and A3
• Dimensions (L x H x W): 30mm x 68.5mm x 116mm
• Weight:
• Head: 0.18kg
• Electronics: 0.19kg

Warranty:

• 12 Months Warranty Covered By Fluke