Fluke FLUKE-87V/IMSK (3448783) Industrial Multimeter Service Combo Kit

Features:

• Fluke-87V Multimeter has true-rms accuracy and advanced functionality to give you the results you need
• True-rms accuracy with manual and automatic ranging, Display Hold, Auto Hold, and Min/Max-Average recording
• Efficiently troubleshoot motor drives, plant automation, power distribution, and electromechanical equipment even in loud, high-energy, and high-altitude locations
• A low pass filter supports accurate frequency measurements on VFDs and captures intermittents as fast 250 µS
• Fluke-i400 AC 400A Current Clamp turns the 87V into a clamp meter
• The current clamp provides accurate current measurements up to 400 A ac without breaking electric circuits
• Allows taking measurements safely with industry standard safety ratings
• The 80BK-A DMM Temperature Probe plugs into the 87V’s voltage jacks and allows temperature measurements from -40 °C to 260 °C (-40 °F to 500 °F)
• TL75 Test Leads and AC175 Alligator Clips complete this versatile kit.
• Safety rated CAT III 1000 V, CAT IV 600 V meter to get you home safely from the job.
• Designed to withstand spikes of more than 8000 V. Audible Input Alert warning against wrong use of input jacks.

Specifications:

Fluke 87V IMSK Industrial Multimeter Combo Kit Specifications

• Voltage DC:
  • Maximum Voltage: 1000V
  • Accuracy: ±(0.05% + 1)
  • Maximum Resolution: 10 µV
• Voltage AC:
  • Maximum Voltage: 1000V
  • Accuracy: ±(0.7% + 2) True RMS
  • AC Bandwidth: 20 kHz with low pass filter; 3 dB @ 1 kHz
  • Maximum Resolution: 0.1 mV
• Current DC:
  • Maximum Amps: 10 A (20 A for 30 seconds maximum)
  • Amps Accuracy: ±(0.2% + 2)
  • Maximum Resolution: 0.01 µA
• Current AC:
  • Maximum Amps: 10 A (20 A for 30 seconds maximum)
  • Amps Accuracy: ±(1.0% + 2) True RMS
  • Maximum Resolution: 0.1 µA
• Resistance:
  • Maximum Resistance: 50 MΩ
  • Accuracy: ±(0.2% + 1)
  • Maximum Resolution: 0.1 Ω
• Capacitance:
  • Maximum Capacitance: 9,999 µF
  • Accuracy: ±(1% + 2)
  • Maximum Resolution: 0.01 nF
• Frequency:
  • Maximum Frequency: 200 kHz
  • Accuracy: ±(0.005% + 1)
  • Maximum Resolution: 0.01 Hz
• Duty Cycle:
  • Maximum Duty Cycle: 99.9%
  • Accuracy: ±(0.2% per kHz + 0.1%)
  • Maximum Resolution: 0.1%
• Temperature Measurement: -200.0°C - 1090°C, -328.0°F - 1994.0°F, excluding probe
• 80 BK Temperature Probe: -40.0°C - 260°C, -40.0°F - 500°F, 2.2°C or 2% whichever is greater
• Conductance:
  • Maximum Conductance: 60.00 nS
  • Accuracy: 0.01 nS
  • Maximum Resolution: 0.01 nS
• Diode:
  • Range: 3V
  • Resolution: 1mV
  • Accuracy: ±(2% + 1)
• Duty Cycle Range:
  • Accuracy: Within ±(0.2% per kHz + 0.1%)
• Operating Temperature: -20°C to + 55°C
• Storage Temperature: -40°C to + 60°C
• Humidity (Without Condensation):
  • 0% - 90% (0°C - 35°C)
  • 0% - 70% (35°C - 55°C)
• Operating Altitude: 2000m
• Overvoltage Category: EN 61010-1 to 1000 V CAT III, 600V CAT IV
• Agency Approvals: CE, CSA, RCM
• Display:
  • Digital: 6000 counts updates 4/sec. 19,999 counts in high–resolution mode
  • Analog: 32 segments, updates 40/sec
  • Frequency: 19,999 counts, updates 3/sec at > 10 Hz
• Battery Life: Alkaline, ~400 hours typical, without backlight
• Shock: 1 Meter drop per IEC 61010–1:2001
• Vibration: Per MIL-PRF-28800 for a Class 2 instrument
• Dimensions (with holster) (L x W x H): 201mm x 98mm x 52mm
• Weight: 0.36kg 

Fluke i400 AC Current Clamp Specifications

• Nominal Current Range: 400A
• Continuous Current Range: 1A - 400A
• Maximum Non-Destructive Current: 1000A
• Lowest Measurable Current: 1A
• Basic Accuracy: 2% + 0.06A, (45-400Hz), (% reading + floorspec)
• Useable Frequency: 5Hz - 20kHz
• Output Level(s): 1mA/A
• Safety: CAT IV 600V, CAT III, 1000V
• Maximum Voltage: 1000V AC rms from earth to ground, in compliance with EN61010
• Maximum Conductor Diameter: 32mm
• Maximum Conductor Size (busbar): 750MCM
• Output Cable Length: 1.5m
• Shrouded Banana Plugs: Yes 

Warranty:

• Fluke 87V IMSK: Lifetime Warranty covered by Fluke
• Fluke i400: 1 Year Warranty covered by Fluke