Fluke FLUKE-1503 (2427883) 1503 Insulation Resistance Meter

Fluke FLUKE-1503 (2427883) 1503 Insulation Resistance Meter

The Fluke 1503 is a great choice for basic residential and commercial electrical insulation testing. This rugged, compact tool fits in the palm of your hand. The 1503 is the same form factor as the Fluke 1507 but with a few less features. You can count on it to handle the most common tests at a most affordable price. Additional features, like the remote probe, reduce the time needed to perform repetitive testing.

Features:

• A rugged, compact insulation resistance tester for residential and commercial electricians
• Performs insulation tests from 0.01 MΩ to 2000 MΩ
• Offers two insulation test voltages: 500 V and 1000 V
• Includes live circuit detection to prevent insulation test if voltage >30 V is detected
• Measures resistance from 0.01 Ω to 20.00 kΩ

Specifications:

• AC/DC Voltage Measurement Accuracy
• Range: 600.0 V
• Resolution: 0.1 V
• 50 Hz to 400 Hz ±(% of Rdg + Digits): ±(2% + 3)
• AC/DC Voltage Input impedance: 3 MΩ (nominal), < 100 pF
• AC/DC Voltage Common mode rejection ratio (1 kΩ unbalanced): > 60 dB at DC, 50 or 60 Hz
• Overload protection: 600 V rms or DC
• Earth Bond Resistance Range/Resolution:
• 20.00 Ω 0.01 Ω
• 200.0 Ω 0.1 Ω
• 2000 Ω 1.0 Ω
• 20.00 kΩ 0.01 kΩ
• Earth Bond Resistance Measurement:
• Accuracy: ±(1.5% + 3)
• Overload protection: 2 V rms or DC
• Open circuit test voltage: > 4.0 V, < 8 V
• Short circuit current: > 200.0 mA
• Insulation:
• Measurement range: 0.01 MΩ to 2000 MΩ
• Test voltage: 500 V, 1000 V
• Test voltage accuracy: + 20%, - 0%
• Short circuit current: 1 mA nominal
• Auto discharge: Discharge time < 0.5 second for C = 1 µF or less
• Live circuit indicator: Inhibit test if terminal voltage > 30 V prior to initialization of test
• Maximum capacitive load: Operable with up to 1 µF load
• Measure accuracy 500 V: ±(1.5% + 5)
• Measure accuracy 1000 V: ±(1.5% + 5) to 2000 MΩ, ±(10% + 3) above 2000 MΩ
• Maximum voltage applied to any terminal: 600 V AC rms or DC
• Storage temperature: -40°C to 60°C (-40°F to 140°F)
• Operating temperature: -20°C to 55°C (-4°F to 131°F)
• Temperature coefficient: 0.05 x (specified accuracy) per °C for temperatures < 18°C or > 28°C (< 64°F or > 82°F)
• Relative humidity:
• 0% to 95% @ 10°C to 30°C (50°F to 86°F)
• 0% to 75% @ 30°C to 40°C (86°F to 104°F)
• 0% to 40% @ 40°C to 55°C (104°F to 131°F)
• Vibration: Random, 2 g, 5-500 Hz per MIL-PRF-28800F, Class 2 instrument
• Shock: 1 meter drop per IEC 61010-1 2nd Edition (1 meter drop test, six sides, oak floor)
• Electromagnetic compatibility: In an RF field of 3 V/M, accuracy = specified accuracy (EN 61326-1:1997)
• Safety: Complies with ANSI/ISA 82.02.01 (61010-1) 2004, CAN/CSA-C22.2 NO. 61010-1-04, and IEC/EN 61010-1 2nd Edition for measurement category IV 600 V (CAT IV)
• Certifications: CSA per standard CSA/CAN C22.2 No. 61010.1-04; TUV per standard IEC/EN 61010-1 2nd Edition
• Batteries: 4 x AA batteries (NEDA 15A or IEC LR6)
• Battery life: Insulation test use: Tester can perform at least 1000 insulation tests with fresh alkaline batteries at room temperature. These are standard tests of 1000 V into 1 MΩ with a duty cycle of 5 seconds on and 25 seconds off.
• Resistance measurements: Tester can perform at least 2500 earth bond resistance measurements with fresh alkaline batteries at room temperature. These are standard tests of 1 Ω with a duty cycle of 5 seconds on and 25 seconds off.
• IP rating: IP40
• Operating Altitude: 2000 m CAT IV 600 V, 3000 m CAT III 600 V
• Storage Altitude: 12,000 m
• Over-range capability 110% of range
• Included accessories: TL224 Test Leads, TP74 Test Probes, clips PN 1958654 (red) and PN 1958646 (black), holster and remote probe
• Dimensions (L x W x H): 203mm x 100mm x 50mm
• Weight 0.55kg

Warranty:

• 12 Months Warranty Covered By Fluke