Fluid Film FLUFLM_AS_333G_BLACK 333G (Grade 2) Black Aerosol Can Rust & Corrosion Prevention For Vehicle Underbody Protection

FLUID FILM BLACK® is formulated from specially processed wool-wax, highly refined petroleum oils and selected agents to provide corrosion control, penetration, metal wetting and water displacement. The long lasting product contains no solvents, will not dry out and will penetrate to the base of all metals, providing corrosion protection from both natural and industrial atmospheres. Heavily corroded and/or frozen parts such as nuts, bolts, shafts, etc. that would normally be damaged during maintenance, can be salvaged by applying FLUID FILM BLACK®.

Specifications:

• Appearance: Black coloured liquid
• Viscosity:
  • Brookfield: HBF, 70º F
  • #2 Spindle: at 2RPM
  • 10 - 20 Reading: (16,000 - 32,000 cps)
• Flash Point, Bulk Liquid (ASTM-92 Cleveland Open Cup): 405º Minimum
• Non-Volatile: 89% Minimum (3 hours @ 220ºF)
• VOC. CARB 310: AS: Less than 25%, NAS: Les than 1%
• Specific Conductivity: Less than 10 -9 ohm/cm @ 1mHz
• Specific Gravity: 0.875 - 0.885 (less propellant)
• Effect on Rubber (ASTM D-471 @ ± 158ºF 70 hours): None on neoprene and buna-n. May cause swelling on non oil-resistant rubber goods
• Effect on Paint: None on most painted surfaces
• Effect on Aluminium: No pitting
• Extreme Pressure (ASTM D-2782 TImken Method): Fail load - 15 pounds
• Wear Prevention Characteristcs (ASTM D-2266 Four Ball Method): 40kg, 1200 RPM for 1 hour @ 167º F. Results: Scar diameter of 0.49mm
• Repaintability: Contain no silicones. It is recommended that surfaces treated with FLUID FILM® AS or NAS be. hot water or steam detergent washed (120ºF), whichever is most effective
• Corrosion Protection (ASTM D-1735 Humidity Cabinet): Passes 50 days
• ASTM D-1748 (Humidity Cabinet): Passes 30 Days
• MIL-C 16173 (Corrision Requirement): Grade 2 -Soft Films. Meets & exceeds salt spray requirements
• Water replacement: Displaces from all metal surfaces (MIL-C-23411, Paragraph 3.6).
• Toxicity: Non-toxic, LD-50 greater than 3 grams per kilogram. Non-irritating skin response. Very slight irritation to the eyes. (Toxicity tests performed according to standard methods by an independent laboratory).
• Warning:
  • AS: Extremely flammable. Contents under pressure. Do not puncture, incinerate or store above 120°F. Keep from open flame.
  • NAS: Combustible. Do not incinerate
• Spray Nozzle Cleaning: Turn can upside down, point in a safe direction and spray until only propellant escapes. If spray button becomes clogged during use, pull it from the can and clean it with a fine wire or needle. Replace the button with a gentle twisting motion, keeping it pointed in a safe direction. Do not stick pins or other objects into nozzle tube.

SDS Download:

• Fluid Film Aerosol
• Fluid Film Non-Aerosol