The CPI CDETG2 Laser Detector is a small, compact device with a highly accurate reading for laser aligning applications. It is compatable with the many laser models including:
- CL101
- CPIG2
- CPI106G
- CPI106
- CUBE
- CPI4D
- CPI4DG
- Most Bosch Line Lasers
- Most Dewalt Line Lasers
- Any Laser with 5k frequency
Features:
- Brightness indicators located on the front and back side to indicate the position of the laser line
- Automatically switches off after 6 minutes of inactivity
- Low power alarm with flash to indicate the battery power is low
- Precision mode provides high accuracy when switched on, and coarse mode when switched off
- Magnetic points located on the top and left side of the laser allowing it to easily attach to metal surfaces
- Small, compact and portable design
- User friendly interface and controls
Specifications:
- Accuracy:
- Avaliable distance:
- Red beam: 1 - 35m horizontal, 1 - 20m vertical
- Green beam: 1 - 45m horizontal, 1 - 35m vertical
- Modulating frequency: 5k
- Auto switch off: after 6 minutes
- Power supply: 2 x AAA Alkaline batteries
- Dimensions (L x W x D): 111mm x 61mm x 23mm
- Weight: 0.14kg
Warranty:
- 12 Month Warranty Covered By CPI Australia
The CPI3TG All Function Laser is perfect for a variety of levelling applications, including light placement, door fittings, window fittings and decking. The CPI3TG is cased as a small compact unit with a soft rubber framing for extra drop protection! The Laser features a mounting hole on the bottom of the device to fit a tripod!
Includes:
- Instrument (CPI3TG Laser)
- Laser Target
- Wall mount
- Magnetic wall mount & base
- Protection glasses
- 4 x AA Rechargeable Batteries
- Battery Charger
- User manual
- BMC case
Features:
- Highly visible Green laser!
- Precision 360° full plane coverage
- Auto shut off at 4V
- Single-operation button
- Appreciated and used by: Tradesmen, electricians, plumbers, caprenters and more!
- Gravity pendulum for precise leveling!
- Extremely accurate!
- Pendulum lock
- Magnetic bracket included
Applications:
- Carpentry: Level and set cabinets and counter tops. Install trim and millwork
- Stair layout; level and plumb decks; plumb framing and partition walls; plumb window and door frames.
- Concrete: set forms and footings.
- Electrical: Level electrical outlets; transfer lighting layout from floor to ceiling.
- Plumbing: Layout piping, sewer lines, drainage and feed lines; transfer sprinkler system layout from floor to ceiling.
Specifications:
- Working Range: Radius 50m (with receiver)
- Accuracy: ±1.5mm/7m
- Leveling range: ±3.5°
- Adopt Levelling: Gravity Pendulum
- Wavelength: 510-535nm
- Laser Class: Class II
- Working Temperature: -10° -- +45°
- Dust & Water Proof: IP54
- Power supply: 4XAA Rechargeable Batteries
- Continuous Working Time: Approx. 5 Hours
- Dimensions (L x W x H): 115mm x 68mm x 107mm
- Screw Thread: 1/4"
- Weight: 5.2kg
Warranty:
- 12 Month Warranty Covered By CPI Australia